My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 166–180 of 358 results
-
- Hi-flow Blast Pot Pusherline Kit
- Used on Blast Pots between the air control valves and the metering valve
- Sold as a complete assembly Including
- Pusherline Air Hose
- 1-¼" ball valve
- 1-¼" Nut and tails with bolt style clamps for in-field installation
- Does not include Metering Valve
-
BA01990BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement 1-¾" O-ring for the 1" inlet valve (factory part number 01990).BA01990BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement 1-¾" O-ring for the 1" inlet valve (factory part number 01990).
-
DMECK2999
- 24 ft cable with alligator clips
- Connects directly to a battery to supply 12 volt power for deadman controls
- Deadman cable is fitted with a 2-Pin TwistLok plug connector for connecting to Deadman controls on the blast pot
DMECK2999- 24 ft cable with alligator clips
- Connects directly to a battery to supply 12 volt power for deadman controls
- Deadman cable is fitted with a 2-Pin TwistLok plug connector for connecting to Deadman controls on the blast pot
-
DM2152ACRK
- Pneumatic Complete Retrofit kit includes:
- Triple-line coupled remote control hose
- Control hose connections for air supply
- Auto air valve and Thompson Valve II metering valve
- Pneumatic push-pull abrasive on-off switch
- Response deadman handle
DM2152ACRK- Pneumatic Complete Retrofit kit includes:
- Triple-line coupled remote control hose
- Control hose connections for air supply
- Auto air valve and Thompson Valve II metering valve
- Pneumatic push-pull abrasive on-off switch
- Response deadman handle
Part Number Purchase Price DM2152ACRK $3,083.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$3,083.00
-
-
- Compatible with a wide range of blast pots
- Digital display of actual blasting time for individual blast outlets
- Allows you to determine productivity, production rates, assisting project costings, job estimates and scheduling maintenance for common wear items
- System available to run off pneumatic and electric deadman controls
- Triggered instantly by the deadman signal, so you get actual blasting hours
- Options available for single and multiple outlets.
-
The industry-proven Schmidt TeraValve™ XL metering valve is revolutionary in its ability to provide high performance abrasive metering while boasting an enhanced service life.
- Durable. The XL (extended life) technology offers more durability - even when blasting with aggressive media like aluminum oxide or steel grit.
- Convenient. No special modifications are required to swap an older pressure-hold valve (like the Thompson) to a Tera. Even older pressure-release pots can be upgraded with a TeraValve Retrofit Kit, as long as there is at least 6" clearance from the bottom of the pot.
- Preferred. BlastOne provides the Tera Valve as standard equipment on all new blast equipment. In addition, we use them in our own rental fleet.
-
When Axxiom released the Thompson 2 valve, the benefits of Pressure-Hold technology were instantly upgraded by improved user experience over the Thompson I valve. Details as follows:
- Improved servicability:
- Body and cylinder are now 2 parts, providing easier removal of sleeve and plunger.
- Additional Seal protection:
- Has 3 separate seals (versus the original 1), reducing dust migration and improving durability.
- Multiple Sleeve choices:
- In addition to the original Tungsten Carbide and Urethane full-flow options, Axxiom has released additional options that help prevent over-consumption in various applications.
- Virtual Position Indicator:
- Simplifies setting of the media flow rate.
- Cleanout:
- Full 1" port directly under the inlet allows cleanout without removing the valve.
- Size info:
- Standard 1-¼” (32 mm) inlet thread
- 4 choices of MNPT piping for pusher-line connection
- 1", 1-¼", 1-½", and 2"
- Options: Make servicing the valve even more convenient with one of the following:
- Union-End Ball Valve - The UEBV allows removal of valve without emptying the pot.
- Tri-Clover Quick Connect - allows removal of valve without tools.
- Combination UEBV and Tri-Clover - combines the benefits of both options at a reduced cost.
- Improved servicability:
-
- Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
- Used when an overhead hopper automatically feeds abrasive into a blast machine.
- Rugged stainless steel body, compact, isolated 2-bolt construction.
- Doubles blast machine refill cycle time.
- Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
- Set and forget – flow rates stay set where you put them.
- High wear, rugged plunger seal.
- Stainless steel body for long life.
- Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
- Fit a rebuild kit while the valve is still fitted to the blast machine.
- Sold individually.
- Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing
-
Schmidt changed the abrasive blasting industry when they introduced the MicroValve™. Now known as the MicroValve I (or the Original Microvalve), it is still available although most pressure-release Schmidt pots now use the newer MicroValve III®. It features:
- Simple threaded screw-type metering
- Hardened steel threaded base nipple
- (The brass threaded coupling shown is available separately.)
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
- Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
- Designed to handle the harshest blasting environments known
- Will handle up to a 3/4" blast nozzle
- Will work with any abrasive, including very fine/dusty abrasives
- Most rugged and reliable valve for any application
- Sold Individually
- Genuine Parts - Made in USA by Schmidt / Axxiom Manufacturing
-
The Thompson I Valve was invented by Bob Schmidt and was instrumental in causing the popularity of pressure hold technology.
- Pressure-hold systems retain the pressure in the blast pot until the deadman handle is depressed. This reduces abrasive and energy waste.
- The Thompson I offers fine control for abrasive metering
- It comes in 3 nipple size configurations:
- 1 ¼” (32 mm) x 1 ¼” (32 mm)
- 1 ½" (38 mm) x 1 ½" (38 mm)
- 2" (50 mm) x 2" (50 mm)
- Threaded-plunger metering design with air actuated operation
- Fits most sand blast hoppers, blast pots or abrasive blasting machines
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
GV02427
- The Flat Sand Valve is the classic Clemco abrasive metering valve used for sandblasting for nearly 100 years.
- Used in most new Classic blast machine pots
- The FSV is simple and economical and provides abrasive metering control for expendable mineral abrasives and slags (not recommended for steel grit or aluminum oxide).
- The valve uses a simple lever and keyslot to control the flow of abrasive from the blast pot into the blast hose
- It is good practice to keep a complete spare valve on hand to use when needed, repairing the worn valve at a convenient later time.
- Genuine Clemco Part Number 02427
GV02427- The Flat Sand Valve is the classic Clemco abrasive metering valve used for sandblasting for nearly 100 years.
- Used in most new Classic blast machine pots
- The FSV is simple and economical and provides abrasive metering control for expendable mineral abrasives and slags (not recommended for steel grit or aluminum oxide).
- The valve uses a simple lever and keyslot to control the flow of abrasive from the blast pot into the blast hose
- It is good practice to keep a complete spare valve on hand to use when needed, repairing the worn valve at a convenient later time.
- Genuine Clemco Part Number 02427
-
The Flat Sand Valve is legacy metering technology, where the metering is performed by sliding a lever to open and close the abrasive port. It is simple in design and relatively inexpensive, but has a few limitations. Details as follows:
- Slide-plate metering design, controlled by lever
- 1 1/4" (32 mm) ports
- Features side cleanout-inspection port
- Available with or without outlet nipple and Y-piece (Optional rubber lined nipple is available to extend nipple life.)
- The major limitations are:
- Not recommended for use with metallic abrasives
- The slide plate/lever design does not provide effective fine metering control. Typically this results in over consumption of media. For low-volume blasting using inexpensive media, this may not be an issue.
-
GVDNV100
- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
GVDNV100- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
-
Have a good pot that you hate to throw away? The TeraValve™ Complete Blast Pot Retrofit Kit allows you to obtain state-of-the-art pressure-hold abrasive metering technology and save money in the process! Details as follows:
- Your existing pot must be structurally sound and must have at least 6 inches clearance below it.
- The retrofit kit includes a new TeraValve™ as well as all other valves, piping, deadman handle/controls, and hoses required for a complete upgrade.
- Note: Handway and pop-up components are available separately, if needed. In addition, you may want to consider the optional VBS II muffler and/or a union-end ball valve / quick connect (if you have the necessary clearance). See Related Products below.
- Retrofit kits are available in either pneumatic or electric and are offered in both 1-¼" and 1-½" valve sizes.
- Installation instructions are included in the box (and under the Documents tab here). If installation assistance is needed, call us for friendly tech support via phone or we can arrange to have our technicians perform the installation for you.
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.
