My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 136–150 of 352 results
-
BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002). -
BAWF8012
- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
BAWF8012- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
-
BA7046003
- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA7046003- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
AFPRGUC200RE
- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
AFPRGUC200RE- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
Part Number Purchase Price AFPRGUC200RE $72.94 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$72.94
-
-
-
AFREGARG30
- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
AFREGARG30- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
Part Number Purchase Price AFREGARG30 $67.59 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$67.59
-
-
BAMV4P6
- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
BAMV4P6- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
-
BAUT50G
- Used to store water for use when Wet Blasting
- Often used with the MistBlaster and AirPrep Combination Skid
- Holds up to 50 Gallons
- Mist Blaster uses 1 pint of water per minute when blasting. Should support about 6 hours of wet blasting (not in washdown mode)
- Easy to remove lid for refilling
- Sold Individually
- Genuine BlastOne Product
BAUT50G- Used to store water for use when Wet Blasting
- Often used with the MistBlaster and AirPrep Combination Skid
- Holds up to 50 Gallons
- Mist Blaster uses 1 pint of water per minute when blasting. Should support about 6 hours of wet blasting (not in washdown mode)
- Easy to remove lid for refilling
- Sold Individually
- Genuine BlastOne Product
-
VCBV500
- Walk-behind vacuum blasting head
- Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 64 ft²/6 m² per hour.
- Compressed air requirement: 500 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Mounted with Wheels, making it easy to maneuver
- Has replaceable rubber lining and brushes.
- Genuine Parts – Manufactured by Pinovo in Norway
VCBV500- Walk-behind vacuum blasting head
- Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 64 ft²/6 m² per hour.
- Compressed air requirement: 500 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Mounted with Wheels, making it easy to maneuver
- Has replaceable rubber lining and brushes.
- Genuine Parts – Manufactured by Pinovo in Norway
Part Number Purchase Price VCBV500 $17,181.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$17,181.00
-
-
IPC1200
- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 8" and 36" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
IPC1200- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 8" and 36" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
-
VCBV700
- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
VCBV700- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
-
VCBV600
- A lightweight closed-circuit vacuum blaster with interchangeable heads.
- Edge blasting tools.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 27 ft²/2.5 m² per hour.
- Compressed air requirement: 320 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Genuine Parts - Manufactured by Pinovo in Norway.
- Limited availability in the USA - Request a quote/express interest.
VCBV600- A lightweight closed-circuit vacuum blaster with interchangeable heads.
- Edge blasting tools.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 27 ft²/2.5 m² per hour.
- Compressed air requirement: 320 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Genuine Parts - Manufactured by Pinovo in Norway.
- Limited availability in the USA - Request a quote/express interest.
-
DMAAVSR12
- Suits MistBlaster
- Used to control the water flow to the nozzle, via the injector block
- Air Actuated 2-Way Valve
- SS T-Port Ball Valve 1/2", Spring Return
- Mist Blaster requires 2 Valves
- Sold Individually
DMAAVSR12- Suits MistBlaster
- Used to control the water flow to the nozzle, via the injector block
- Air Actuated 2-Way Valve
- SS T-Port Ball Valve 1/2", Spring Return
- Mist Blaster requires 2 Valves
- Sold Individually
-
APFAF0MP
- Suits MistBlaster Wet/Dry Blast Machine
- Filters all incoming air that is going to the pneumatic control lines
- Ensures no moisture, dust or particles causes any issues in the control valves
- 3/8" High Flow Air Valve
- Sold Individually
APFAF0MP- Suits MistBlaster Wet/Dry Blast Machine
- Filters all incoming air that is going to the pneumatic control lines
- Ensures no moisture, dust or particles causes any issues in the control valves
- 3/8" High Flow Air Valve
- Sold Individually
-
DMECKCLIP
- Heavy-Duty Battery Charging Clamps - Bare
- Insulated Vinyl handles for your safety
- 80 Amp capacity, suits 12/24V DC batteries
- 14 to 18 AWG
- Sold as a pair - Black/Red
DMECKCLIP- Heavy-Duty Battery Charging Clamps - Bare
- Insulated Vinyl handles for your safety
- 80 Amp capacity, suits 12/24V DC batteries
- 14 to 18 AWG
- Sold as a pair - Black/Red
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.
