My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 121–135 of 358 results
-
- Deadman-operated control valve (solenoid). Pneumatic or electric versions available.
- Uses an electric or pneumatic charge to push over the shuttle which opens ports to control the deadman system
- Provides sharp, clean and rapid response
- Improves safety
- Installs between twinline and inlet valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
-
BA02006BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the remote control inlet valve (factory part number 02006).BA02006BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the remote control inlet valve (factory part number 02006).
-
DMRMCVEBK
BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the piston outlet valve (factory part number 01928). Includes the following:
- BA01969 Plug Washers (2)
- BA01972 Valve Plug
- BA01974 Compression Spring
- BA01986 Plug Washer Retainer
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
DMRMCVEBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the piston outlet valve (factory part number 01928). Includes the following:
- BA01969 Plug Washers (2)
- BA01972 Valve Plug
- BA01974 Compression Spring
- BA01986 Plug Washer Retainer
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
-
DMRMCVIBK
BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
DMRMCVIBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
-
Part Number Purchase Price DMWTXEDIODE $12.73 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$12.73
-
-
BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).
-
BAWF8012
- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
BAWF8012- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
-
BA7046003
- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA7046003- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
AFPRGUC200RE
- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
AFPRGUC200RE- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
Part Number Purchase Price AFPRGUC200RE $72.94 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$72.94
-
-
-
AFREGARG30
- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
AFREGARG30- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
Part Number Purchase Price AFREGARG30 $67.59 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$67.59
-
-
BAMV4P6
- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
BAMV4P6- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
-
BAUT50G
- Used to store water for use when Wet Blasting
- Often used with the MistBlaster and AirPrep Combination Skid
- Holds up to 50 Gallons
- Mist Blaster uses 1 pint of water per minute when blasting. Should support about 6 hours of wet blasting (not in washdown mode)
- Easy to remove lid for refilling
- Sold Individually
- Genuine BlastOne Product
BAUT50G- Used to store water for use when Wet Blasting
- Often used with the MistBlaster and AirPrep Combination Skid
- Holds up to 50 Gallons
- Mist Blaster uses 1 pint of water per minute when blasting. Should support about 6 hours of wet blasting (not in washdown mode)
- Easy to remove lid for refilling
- Sold Individually
- Genuine BlastOne Product
-
VCBV300
- The PiBlast is designed for automatic blast cleaning of metal pipes.
- This system allows for efficient pipe blasting without the investment of a permanent installation.
- Has 4 blast nozzles which each blast 1/4 of the pipe
- Only available to blast 8"
- Genuine Parts - Manufactured by Pinovo in Norway
- Not Available in USA - Request a quote/express interest
VCBV300- The PiBlast is designed for automatic blast cleaning of metal pipes.
- This system allows for efficient pipe blasting without the investment of a permanent installation.
- Has 4 blast nozzles which each blast 1/4 of the pipe
- Only available to blast 8"
- Genuine Parts - Manufactured by Pinovo in Norway
- Not Available in USA - Request a quote/express interest
Part Number Purchase Price VCBV300 Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
VCBV500
- Walk-behind vacuum blasting head
- Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 64 ft²/6 m² per hour.
- Compressed air requirement: 500 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Mounted with Wheels, making it easy to maneuver
- Has replaceable rubber lining and brushes.
- Genuine Parts – Manufactured by Pinovo in Norway
VCBV500- Walk-behind vacuum blasting head
- Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 64 ft²/6 m² per hour.
- Compressed air requirement: 500 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Mounted with Wheels, making it easy to maneuver
- Has replaceable rubber lining and brushes.
- Genuine Parts – Manufactured by Pinovo in Norway
Part Number Purchase Price VCBV500 $17,181.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$17,181.00
-
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.
