Search: parts paint

Designed for the Binks SV100 HVLP spray gun, this repair kit includes the parts needed for a standard rebuild.

See page 5 on the attached SV-100 paint gun manual for a complete list of the parts included in this kit.

MPN:  K-5057

• 8-ounce bottle of Throat Seal Liquid (TSL).
• Prevents paint drying on the displacement rod and packings, reducing wear.
• Extends component life of your paint spray pumps.
• Specially formulated to dissolve material on displacement rods.
• Suitable for all Paint Spray Pumps.
• Ensures throat seal packings remain lubricated, preventing the pump from running dry.
• Genuine Graco-manufactured part.

AVAILABLE FOR RENT OR PURCHASE

A Graco King Paint Sprayer Pump will easily spray:

• Medium to Ultra-high viscosity coatings
• Plural component coatings
• High-build, high-solids epoxy primers and coatings
• High-build, high-solids Polyurethane top coatings
• Waterborne coatings
• Fire retardant coatings
• Pump Size Calculator

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 6” Long and about 1″ round
• Use with a Filter Support which is inserted into the middle of the Filter
• #30 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 6” Long and about 1″ round
• Use with a Filter Support which is inserted into the middle of the Filter
• #100 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

• Suits Graco King Xtreme and Maxlife Lowers
• Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
• Kit includes Large elbow from the bottom of the pump, 6′ x 1″ suction hose, bent pick-up tube and all the connectors to make it happen
• Sold as a kit
• Genuine Parts – Manufactured by Graco

• Non-genuine tear-off lenses to suit 3M 6000 full face respirator
• Protects the operators from paint overspray
• Sold as a pack of 25 lenses

• Easy to operate
• Utilizes Graco’s popular King and Xtreme airless spray technology
• 2:1 fixed ratio with 115/58 cc lowers
• Lowers have with built-in filters
• Cart mounted
• Comes with material hoses and XTR-7 gun
• Uses an NXT 6500 Air Motor
• Pump Size Calculator

• Hold*Blast is a cost-effective flash rust prevention solution
• Environmentally safe and compatible with all coatings
• It is used to “Hold the Blast” to allow primer to be applied
• Added in low concentration (2-10%) to the ‘blast water’ to prevent flash rusting
• Ideal to mix with your water when wet blasting
• Compare to Hold*Tite 102!
• 32 pails ship on 1 pallet

• Suits Airless Paint Equipment up to 5000psi
• Fluid Ball Valve for High Pressure Paint
• ¼” x ¼” Male Threads on both ends
• 5000psi Rated
• Teflon seals are resistant to solvent
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Wooden Handled Brush
• Economical Painting Brush for use with industrial coatings
• Most 2 part epoxy coatings will quickly ruin a good brush
• Contractors use these for painting rivets, weld seams and for stripe coating.
• Smaller sizes are sold in box quantities only

• Complete Spray Paint Gun Cleaning Kit
• Ultimate Cleaning kits to give you better spray gun operation. Durable, solvent-compatible storage – keeps your tools organized
• Safe to use with solvents
• Durable long lasting tools
• Works with most types of spray guns such as suction, gravity, pressure feed, detail, HVLP, as well as airbruses
• Sturdy storage case included
• Genuine Parts – Manufactured by Graco

The RPB Nova 2000 Blast Helmet with the Cape Cover Band is designed to ensure optimal protection during blasting operations. This cover band is specifically engineered to prevent dust and grit from entering the gap between the cape and the helmet, as well as keeping grit out of the press studs for easier reattachment after cleaning. Sold individually, this genuine part is manufactured by RPB Safety, guaranteeing compatibility and quality for your Nova 2000 helmet.

• Designed exclusively for the RPB Nova 2000 Blast Helmet
• Prevents dust and grit penetration for enhanced protection
• Keeps press studs free of grit for easy cape reattachment
• Sold individually for convenience
• Genuine RPB Safety manufactured part ensures quality and compatibility

• Used for blasting pipe internals with 3″-12″ ID
• Blasts in a 360 degree pattern
• Units come standard with Tungsten Carbide deflector tip
• Select the unit that will best match your Air Supply:
  • IPC4000, 1/2″ Throat Nozzle: 250 cfm
  • IPC4500, 5/8″ Throat Nozzle: 400 cfm
• Order Transport Carriages separately as follows:
  • IPC4100, Collar and Button, for 3″-5″ ID
  • IPC4200, Scissor, for 5″-12″ ID
  • Requires BSP (not NPT) threaded coupling to attached to standard blast hose coupling, part number HFSTC1BSP, available here or under the repair parts tab below.
• Successful Internal Pipe Projects require some specialist knowledge – contact our team for assistance
• Note:  This product is similar to the Clemco Hollo-Blast

• Designed for Industrial Painting Applications
• Designed to be interchangeable with Graco tips and tip-guards.
• Two different guns with pressure ratings of 4200 or 7500 psi
• Has 2 hooks for hanging up or for hanging on a bucket.
• Built-In swivel to optimize ergonomics
• Sold Individually
• Genuine Parts – Manufactured by TriTech USA

• Suits Graco XTR and Series II Airless Spray Guns
• 60# mesh coating spray gun filter for in handle filter units
• #60 Mesh Gun Filter
• Sold Individually
• Manufactured by Bedford Precision Parts

Repair – don’t replace –  your DeFelsko® PRBUTG P (Ultrasonic Thickness Gauge Precision probe) when the transducer fails.  Save hundreds!  BlastOne carries replacement parts for all DeFelsko products including this replacement transducer.

• Fully compliant with all USA regulations
• Exhausts at a rate of 1.6’/second
• 2 Standard widths – 3′ and 7′
• Uses Andreae filters to capture overspray

• Graco Contractor In-line Spray Painting Gun
• Used in applications where you are not spraying directly from the Gun
• Works with Pole Sprayers, Internal Pipe Sprayers and other hard to reach areas
• 3600 psi rated
• Ergonomic, lightweight, design
• Easy trigger pull
• Built-in SmoothGlide hose swivel connector
• EasyAccess filter in handle
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Graco Contractor Airless Paint Spray Gun
• 3600 psi rated Airless Spray Gun
• ComfortGrip grip handle and 2 finger trigger
• EasyAccess #60 filter inside handle (Use GR287032)
• Inbuilt high-pressure swivel
• Includes 517 RacX Tip and Base
• Genuine Parts – Manufactured by Graco

• Suits Graco RAC 5 Airless Spray Tips
• Works to keep the tip in place, provide easy switch out and reduce the chance of injury
• Thread Size is 7/8″
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Suits RAC 5 or RAC V Spray Tip
• Used to Seal between the Spray Gun and the Tip Orifice
• 4050psi Rated
• Sold as a pack of 5
• Genuine Parts – Manufactured by Graco

• Refill kit for CSN Test Kit
• Used to measure surface contamination from Chlorides, Sulphates and Nitrates
• Comes in a Pack of 5 Tests
• Genuine Parts – Manufactured by ChlorRid

• Genuine RPB replacement lens for L4 Blast Light
• Ensure you can work with optimal illumination as paint mist eventually coats lens
• Comes in Pack of 10

• Suits TriTech 7500psi MAXX spray tips
• Safety guard for help ensure you don’t inject yourself
• Large knurls assist grip when tightening
• Suits Graco Standard Airless Guns
• Sold Individually
• Genuine Parts – Manufactured by TriTech USA

• Suits Graco King, Extreme XL, Extreme and Duraflow Heavy Duty Pumps
• Plastic Hopper Kit for gravity feeding material
• For high solids and thick bodied coatings, use a gravity feed hopper to feed the coating into the sprayer
• Kit comes complete with
  • Plastic Hopper
  • Lid to keep out trash and the weather
  • Bracket and mounting pieces for the front of your pump
  • Elbows and connector for lower
  • Everything you need.
• Genuine Parts – Manufactured by Graco

• Suits GVS Integra half-mask w/goggles
• Protects goggles while spraying.  Remove and replace when needed to keep the goggle lens clear.  Save time over cleaning the goggles by hand!
• 10 peel-off visor lenses per pack
• Priced per pack.  5 packs per case.
• Genuine Parts – Manufactured by GVS

• Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
• Suits Graco Pumps in Hazardous locations
• Electrical Specs 240 VAC, 4000watts, 16.7 amps
• Manufactured with Stainless Steel
• Rated to 7,250 psi
• Can be wall or cart mounted
• Genuine Parts – Manufactured by Graco

• Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
• Suits Graco Pumps in Hazardous locations
• Electrical Specs 120 VAC, 2300watts, 19.2 amps
• Manufactured with Stainless Steel
• Rated to 7,250 psi
• Can be wall or cart mounted
• Genuine Parts – Manufactured by Graco

The RotoBlast is the fastest way to blast the internals of pipes.  This IPC1000 version is designed for pipes from 10″ to 35″ ID. Fast and effective blasting is ensured by the twin-nozzle spinning blast head.

Additional details of this Internal Pipe Blaster are as follows:

• 360 degree blasting covers the entire ID of the pipe
• Speed is manually controlled.  Optional electric winch is also available, helping to save labor and aid consistency in results.
• This IPC1000 pipe blasting tool works in pipes 10″ to 35″ ID
• Nozzles sold separately – details below:
  • 2 nozzles are required for this unit.
  • Use BNAT nozzles for pipes from 8″ to 11″ ID.
  • Use BNASB nozzles for pipes from 12″ to 36″ ID.
• Centering carriage sold separately – details below:
  • IPC1200 Centering Carriage is required and is adjustable to work in pipes from 8 to 36″ in diameter.
• Note:  ID blasting equipment requires significant maintenance.  A Rotoblast Repair Parts Kit is available for convenience, or individual parts may be purchased under the Parts Tab.  An operators manual is shown under the documents tab or you can contact us for further information.

• FREE Shipping
• 30 Day Money Back Guarantee | Free Returns
• Suits Graco King and Xtreme Airless Sprayers
• Suction Kit for Xtreme Pump Kit
• Kit includes
  • 6′ x 1″suction hose
  • Quick knock off coupling for attaching to pump
  • Bent 18″ pick up tube for suctioning paint from a 5 gallon pail
  • Elbow and adaptor nipple
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

• Suits Graco King, Extreme XL, Extreme and Duraflow Heavy Duty Pumps
• Stainless Paint Hopper Kit for gravity feeding material
• Kit comes complete with
  • Stainless Steel Hopper
  • Lid to keep out trash and the weather
  • Bracket and mounting pieces for the front of your pump
  • Elbows and connector for lower
  • Everything you need.
• Genuine Parts – Manufactured by Graco

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

The PosiTector® DPMS version (only) in the Dew Point Meter family of probes has the unique capability of accepting these two optional accessories, which are:

• PRBDPMHSP, Hand-Held Surface Temperature Probe, for spot checking hard-to-reach surfaces
• PRBDPMLTP, Liquid Temperature Probe, for checking the temperature of paint and other industrial liquids

Also known as Brown Fused Alumina, Brown Fused Aluminium Oxide Abrasive Media Is a Long Lasting and Sharp abrasive used for high-performance applications and general industry use. Aluminium oxide is very hard and aggressive and is commonly used for mixing with paint coatings for nonslip surfaces. White aluminum oxide also available.

AVAILABLE FOR RENTAL OR PURCHASE

• LED explosion proof mountable area light
• Kick-it-tough design to outlast brutal onsite treatment from contractors
• Comes with explosion proof cable
• Approved for: Class 1, Div 1 & 2; Groups C & D
• Suitable for wet location use
• LEDs color: ~6000K, CRI >70
• Weight: 10 lbs (light head only)
• Genuine Parts – Manufactured by Western Technology

• Can be used in tip filter housing, swivel spray nozzle or inline filter
• 0.005”
• #100 mesh
• Sold in packs of 5
• Genuine Graco part

• Suits Standard 1″ Graco Pick-up tubes for 55 gallon drums
• Screws onto the bottom of a standard pick up tube to make it longer.
• Includes the 1″ diameter extension and the coupling to make the connection
• Sold as a kit with 2 components
• Genuine Parts – Manufactured by Graco

• Exceptional spray finish quality
• Lightweight and robust gun
• Ergonomic design for operator comfort and control
• Air inlet swivel for ease of movement
• Unique replaceable PEEK or stainless steel needle tip reduces maintenance costs
• Superbly engineered with few parts – simple to disassemble for cleaning and service
• Convertible between airspray and compliant (HVLP models also available)
• Available in pressure feed, siphon feed or gravity feed setups with or without cups

• Rebuild kit for Graco XTR+ Airless Spray Guns
• Gun repair kit includes gasket, needle, and seat (full list under description tab)
• Genuine Parts – Manufactured by Graco

MPN:  248837

• Suits for RPB Radex and Bullard Breathing Air Filters
• Replacement Carbon filled Breathing Air Filter
• Removes unwanted smells and air impurities
• Does not remove CO Carbon Monoxide
• Filter cartridges must be changed every 3 months or 400 hours usage – whichever occurs first, because the charcoal is activated when opened.
• Sold Individually
• Genuine Parts – Manufactured by RPB Safety

• Suits Graco XHD Airless Spray Tips
• 7250 psi rated
• Works to keep the tip in place, provide easy switch out and reduce the chance of injury
• Hand-tight guard – no tools required
• Long life guaranteed
• Tip and guard are interchangeable with the GHD spray tip
• Use with industrial high solids and heavy duty coatings
• Genuine Parts – Manufactured by Graco

• Suits Graco RAC X Airless Spray Tips
• Works to keep the tip in place, provide easy switch out and reduce the chance of injury
• Thread Size is 7/8″
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Suits TriTech 4200psi T93R spray tips
• Safety guard for help ensure you don’t inject yourself
• Large knurls assist grip when tightening
• Suits Graco Standard Airless Guns
• Sold Individually
• Genuine Parts – Manufactured by TriTech USA

• Suits Graco XTR and Series II Airless Spray Guns
• 100# mesh coating spray gun filter for in handle filter units
• #100 Mesh Gun Filter recommended for thinner coatings
• Sold Individually
• Manufactured by Bedford Precision Parts

• Designed for high production applications
• 5:1 Pump Ratio
• Often used as a solvent flush pump on larger Plural Component Spray Systems
• Pneumatic 2-ball piston pump
• Maximum Flow Rate 2.1 GPM
• Genuine Parts – Manufactured by Graco

The PosiTest Cross Hatch Adhesion Test Kit – DeFelsko’s system for detecting a coating’s ability to adhere to its substrate.  Multiple package options available, depending on the test standard selected and the thickness of the coating.  Details as follows:

• Simple. Straighforward and easy-to-use, each package includes all tools and accessories needed for cross hatch testing
• Comfortable.  The ergonomic tool handle has a non-slip grip
• Capable.   Designed for coatings up to 10 mils thick and available in configurations to meet two different international standards.  (See long description tab for for standard details.)
• Package options.
  • ISO 2409 Standard
    • 1 mm / 6 Teeth blade version
    • 2 mm / 6 Teeth blade version
    • 3 mm / 6 Teeth blade version
  • ASTM D3359 Standard
    • 1 mm / 11 Teeth blade version
    • 2 mm / 6 Teeth blade version
• Package contents.  Each kit includes the following:
  • Cross Hatch Tool
  • 4-in-1 Blade to match the relevant standard
  • Magnifier – 3X (ISO) or 10X (ASTM)
  • Tape to match the relevant standard
  • Brush
  • Scissors
  • 3/32″ Hex Key
  • ISO/ASTM Classification Reference Chart
  • Instruction Manual
  • Durable Hard Shell Case

Additional tape and blades are available under the repair parts tab.

FOR RENTAL OR PURCHASE

• Ideal for blasting penstocks, tunnels, pipelines, wind towers, etc.
• Offers full 360 degree coverage of pipe internals
• Self-propelled forward or reverse motion
• Can blast pipelines 3′ – 32′ in diameter
• Lowers labor costs as much as 75% compared with manual blast-pot operations
• Eliminates inconsistencies commonly found with manual blasting

MOBILE DUST COLLECTOR, AIR SCRUBBERS & PORTABLE DUST EXTRACTORS

• Ready availability all over the US
• Diesel powered
• Trailer mounted or skid mounted
• Industry leading design
• All sizes available
• Read our Dust Collector Buying Guide
• Portable dust extractor for site work
• Onsite dust collectors and onsite dust ventilation
• Industrial portable dust collectors

The PosiTest OTL – DeFelsko’s solution to monitor and record temperature profiles in Powder Coating and other industrial ovens. Configurable in various ways, some of it’s features include:

• Simple Design.  With an easy-to-use interface and bright LED’s to indicate logger status, operating the Oven Temperature Logger is simple and intuitive.
• Capable.  The DeFelsko OTL can:
  • Measure & record up to 40,000 datasets in up to 6 batches. Records temperatures every 2 seconds for up to 22 hours.
  • 6 ‘Channels’ (K-type thermocouple ports) for adding temperature probes.
• Configurable.  Depending on the specific application, the OTL offers various configurations, such as:
  • PosiTest OTLKIT, including logger with barrier box and standard Holder (65 minute endurance at 200° C)
  • PosiTest OTLKITXT, same as above, except with heat-sink Holder (200 minute endurance at 200° C)
  • (See sliding scale endurance chart on the brochure under the Documents tab)
  • OTL logger only without barrier box, for use with temperature probes and when the logger does not need to be in the oven.

Note:  See the selection of temperature probes on the You May Also Like below.

Also known as White Fused Alumina, White Fused Aluminium Oxide Abrasive Media Is a Clean and Sharp abrasive used for high-performance and delicate blasting and cleaning projects, including cleaning of hi-tech metals. White Fused Alumina is an inert material with excellent abrasive qualities & available from most BlastOne branches in Australia. Brown aluminum oxide also available.

• Suits all Paint Spray Pumps
• Specially formatted to dissolve material on displacement rods
• Throat Seal Liquid (TSL)
• Sold by the bottle 1 Quart
• Extends component life
• Check the pump throat and top up the liquid daily
• Prevents paint drying on the displacement rod and packings
• Genuine Parts – Manufactured by Graco

The PosiTector® DPM – DeFelsko’s solution for measurement of climatic conditions for industrial coating applications.  Versatile and capable, these environmental measuring instruments have the following highlights:

• Familiar.  Built on the tried-and-true PosiTector® gauge/body platform design with interchangeable probes.
• Capable.  Measures and records environmental conditions including:
  • Relative Humidity (RH)
  • Air Temperature
  • Surface Temperature
  • Dew Point temperature
  • Surface/Dew Point Delta
  • Wind speed (one model only)
  • Wet-Bulb (when used with Advanced Bodies only)
• Configurable.  Available as probes-only (to use with an existing gage/body), or in packages with a new gage body, these DPM probes are available as:
  • DPM Integral, with direct-contact surface thermometer
  • DPMIR Integral, with infrared surface thermometer, for use on moving parts, very hot parts, etc., where direct contact is not possible.
  • DPMS Integral, with cabled, magnetic surface temperature sensor for continuously logging surface temperatures. Also available for this model are 2 options:
    •  A liquid temperature probe, for measuring paint temperature prior to application
    • A hand-held surface temperature probe, for spot-checking hard-to-reach areas.
  • DPMA Integral, with all standard features plus a wind-speed indicator
  • DPMD Cabled, with ½” NPT threads for insertion into pipe and other areas that can’t be accessed by other versions.

Note:  The PosiTector® DPM L is an autonomous version, and can be attached independently to steel for longer-term climatic condition recording.

• Trelawny Needle Scalers for rust, scale and paint removal
• Heavy Duty, High Quality Hand Tools
• Pneumatic Operation
• Preferred option for Low Vibration, someone can work for twice as long with Low Vibration
• Come with a different quantity of needles, the more needles the more work you get done.
• Pistol Grip vs Inline based on where you are working, most contractors use 5:1 Pistol Grip
• Sold Individually
• Genuine Parts – Manufactured by Trelawny

• Safety Lens (16-810)
• Suits RPB Z-Link Respirator
• Anti-fog /anti-scratch to give the wearer long time clear vision
• Suitable for welding / grinding / painting / inspection
• Sold Individually

Genuine Parts – Manufactured by RPB Safety

• Destructive pull-off adhesion test
• Applications include paint or plasma spray on bridge decking, coatings on steel, aluminum, concrete, etc.
• Uses standard test dolly
• Used in accordance with ISO4624, AS1580-408-5 Standards
• Kit supplied with unit body, base support ring, 20 dollies, pack of Araldite adhesive, magnetic dolly clamp, dolly cutter, instructions, carry case

The Binks 2100 Spray Guns are very well known as a premium conventional paint gun.  Commonly used with pressure pots, they offer the following:

• Versatility.  Sprays a wide range of materials including adhesives, epoxy, abrasive fluid, and all conventional coatings including high solids.
• Robust Construction.  Built with a forged aluminum body and nickle-plated brass nozzles & knobs for years of service.
• Configurable.  Available with a variety of tip / nozzle sizes, with or without the air cap, and in packages including hose and tanks.
• Rebuildable.  OEM rebuild kits available for all versions.
• Genuine OEM – Manufactured by Carlisle Fluid Technologies.

• Walk-behind vacuum blasting head
• Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
• Nozzle size: No.6 (⅜”)
• Blasting rate: up to 64 ft²/6 m² per hour.
• Compressed air requirement: 500 cfm.
• Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
• Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
• Noise level: 89 dB at 1m distance.
• Mounted with Wheels, making it easy to maneuver
• Has replaceable rubber lining and brushes.
• Genuine Parts – Manufactured by Pinovo in Norway

Limited availability in the USA – Request a quote/express interest.

• Used as part of the SCAT Kit for measuring Ferrous ion content in the titration solution
• Replacement Ferrous Ion Titration Strips
• Come in a Bottle of 100

The T200 Respirator is great for the healthcare market, paint and select industrial applications.  It offers:

• Large viewing window for exceptional downward and peripheral vison
• Moveable lens and airduct positioning to accommodate for facial features, optical aids, and loupes
• Available with two head suspension systems:
  • Bump Cap
  • Head Harness
• Various replacement cape styles include:
  • Tychem 2000 Face Seal (open ears – designed to use with stethoscopes)
  • Tychem 2000 Face Seal/hood (covers ears)
  • Tychem 2000 Full Hood (shoulder length)
  • Tychem 4000 Full Hood, with sealed seams for maximum protection
• Peel-off lenses available
• No fit testing required
• Deconable head suspension system and disposable hood
• Compatible with PAPR

• Highly Portable and Explosion Proof LED Blast Light
• Can be used as a mounted area light or a hand held light
• Suitable for Hazardous and Wet Locations
• Class I, Div 1 & 2 and Class II, Div 1 & 2 Rated
• Smaller version of the Brick Light
• #1 preferred area light for travelling blasters and painters
• Stringer and Medusa light packages available – Made to order only
• Genuine Parts – Manufactured by Western Technology

• Suits Graco XHD Airless Spray Tips and Guards
• XHD Heavy Duty OneSeal Seat and Seal Kit
• Seals spray tip to minimize leaks and maintain optimal tip pressure
• Sold as a pack of 5 seals
• Genuine Parts – Manufactured by Graco

• Versatile tool designed for 5 specific uses:
  • Sharp blade scraper
  • Putty remover
  • Spreader
  • Half round cutout to remove paint from paint roller
  • Sharp point to open cracks for patching
• Genuine Armorflex Corp of America part

• Suits Binks 2100 Siphon Spray Gun
• Fluid Needle Regulates the flow of paint and size of fan pattern
• Recommend replacement as soon as wear shows
• Size 565
• Sold Individually
• Genuine Parts – Manufactured by Carlisle/Binks

Used between the spray hose and the spray gun, this swivel connection eases movement between them.

• Can be used with Graco High Pressure Airless Sprayer Paint Hose and Gun – has a 7500 PSI pressure rating
• 1/4″ Male x 1/4″ Female
• Teflon packed for long life, compatible with solvent
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Suits 1″ Xtreme pumps
• Elbow dip tube to suction paint out of 5 gallon containers.
• 18″ long x 1″ Internal Diameter
• Sold Individually
• Genuine Parts – Manufactured by Graco

• LED wide area stringer flood-light system
• Designed to easily daisy chain, connecting end to end to give your jobsite incredible lighting
• Adjustable brightness from 600 to 6,000+ lumens
• Ordinary location lighting – Non-Explosion Proof (not suitable for painting environment or hot work)
• Each light can be independently dimmed to give each part of the work area the right amount of light it needs
• Can string multiple lights together for up to 250ft
• Genuine Products – Manufactured by Western Technology

When your RPB coating respirators need refreshed, we have the parts you need.  This group includes the replacement Tyvek® capes/hoods.

• For both T-Link and T200 versions:
  • Tychem® 2000 Full-Length Hood, MPN 17-712
  • Tychem® 4000 Full-Length Hood w/sealed seams, MPN 17-713
  • Tychem® 4000 Extra-Long Hood w/sealed seams, double-bib, and waist straps.  MPN 17-713-SX
• For T200 version only:
  • Tychem® 2000 Face Seal, MPN 17-722
  • Tychem® 2000 Face Seal w/Shoulder-Length hood, MPN 17-732
• For legacy T100 version only:
  • Tychem® 4000 Full-Length Hood w/ sealed seams, MPN 07-150

How do Tychem® 2000 and 4000 materials compare?

• Tychem® 2000 is rated for light liquid splash applications and protects against over 40 chemicals.  This version is most commonly used in industrial painting applications.
• Tychem® 4000 is also rated for light liquid splash applications and protects against over 100 chemicals.  RPB constructs their 4000 hoods with sealed seams for even greater protection.

Note:  Keep your vision clear during coating projects by using an appropriate  RPB Tear-Away Lens System.