Accessories for Airless Systems
Showing 1–15 of 16 results
-
- Replacement Lower with built-in filter
- Retrofit an Xtreme pump lower to an existing old-style King or Bulldog air motor
- Improved performance especially with higher pressures 45:1, 56:1, 68:1, 80:1 ratios
- Reduced solvent usage quicker and easier to flush
- Extended life component
- Fast, simplified servicing with quick knockdown intake valve and cylinder
-
IPCRSM900
- Suited to coat pipe internals 12" - 35" (300mm - 875mm)
- 3,600 psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls purchased separately
IPCRSM900- Suited to coat pipe internals 12" - 35" (300mm - 875mm)
- 3,600 psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls purchased separately
-
IPCRSM300
- Suited to coat internal pipes 5" - 12" (125mm - 300mm)
- 3,00psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls sold separately
IPCRSM300- Suited to coat internal pipes 5" - 12" (125mm - 300mm)
- 3,00psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls sold separately
-
IPCRSM100
- Suited for use on pipes 3" - 5" (75mm - 125mm)
- 3,600psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems sold bare - hose and gun ordered separately
IPCRSM100- Suited for use on pipes 3" - 5" (75mm - 125mm)
- 3,600psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems sold bare - hose and gun ordered separately
-
IPC80300
- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
IPC80300- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
-
IPC80125
- Heavy-duty coating unit
- Ideal for use on 3"-5" (75mm-125mm) pipe internals
- Centering carriage, spray tip and shut-off valve included
- Pressured rated = 3,600psi
- Fastens directly to high-pressure (HP) airless spray pump
IPC80125- Heavy-duty coating unit
- Ideal for use on 3"-5" (75mm-125mm) pipe internals
- Centering carriage, spray tip and shut-off valve included
- Pressured rated = 3,600psi
- Fastens directly to high-pressure (HP) airless spray pump
-
GR218956
- Designed for high production applications
- 5:1 Pump Ratio
- Often used as a solvent flush pump on larger Plural Component Spray Systems
- Pneumatic 2-ball piston pump
- Maximum Flow Rate 2.1 GPM
- Genuine Parts - Manufactured by Graco
GR218956- Designed for high production applications
- 5:1 Pump Ratio
- Often used as a solvent flush pump on larger Plural Component Spray Systems
- Pneumatic 2-ball piston pump
- Maximum Flow Rate 2.1 GPM
- Genuine Parts - Manufactured by Graco
-
GR245863
- Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
- Suits Graco Pumps in Hazardous locations
- Electrical Specs 240 VAC, 4000watts, 16.7 amps
- Manufactured with Stainless Steel
- Rated to 7,250 psi
- Can be wall or cart mounted
- Genuine Parts - Manufactured by Graco
GR245863- Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
- Suits Graco Pumps in Hazardous locations
- Electrical Specs 240 VAC, 4000watts, 16.7 amps
- Manufactured with Stainless Steel
- Rated to 7,250 psi
- Can be wall or cart mounted
- Genuine Parts - Manufactured by Graco
-
GR288347
- Suits Graco King, Extreme XL, Extreme and Duraflow Heavy Duty Pumps
- Plastic Hopper Kit for gravity feeding material
- For high solids and thick bodied coatings, use a gravity feed hopper to feed the coating into the sprayer
- Kit comes complete with
- Plastic Hopper
- Lid to keep out trash and the weather
- Bracket and mounting pieces for the front of your pump
- Elbows and connector for lower
- Everything you need.
- Genuine Parts - Manufactured by Graco
GR288347- Suits Graco King, Extreme XL, Extreme and Duraflow Heavy Duty Pumps
- Plastic Hopper Kit for gravity feeding material
- For high solids and thick bodied coatings, use a gravity feed hopper to feed the coating into the sprayer
- Kit comes complete with
- Plastic Hopper
- Lid to keep out trash and the weather
- Bracket and mounting pieces for the front of your pump
- Elbows and connector for lower
- Everything you need.
- Genuine Parts - Manufactured by Graco
-
GR24X570
- Suits Graco King, Extreme XL, Extreme and Duraflow Heavy Duty Pumps
- Stainless Paint Hopper Kit for gravity feeding material
- Kit comes complete with
- Stainless Steel Hopper
- Lid to keep out trash and the weather
- Bracket and mounting pieces for the front of your pump
- Elbows and connector for lower
- Everything you need.
- Genuine Parts - Manufactured by Graco
GR24X570- Suits Graco King, Extreme XL, Extreme and Duraflow Heavy Duty Pumps
- Stainless Paint Hopper Kit for gravity feeding material
- Kit comes complete with
- Stainless Steel Hopper
- Lid to keep out trash and the weather
- Bracket and mounting pieces for the front of your pump
- Elbows and connector for lower
- Everything you need.
- Genuine Parts - Manufactured by Graco
-
GR245848
- Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
- Suits Graco Pumps in Hazardous locations
- Electrical Specs 120 VAC, 2300watts, 19.2 amps
- Manufactured with Stainless Steel
- Rated to 7,250 psi
- Can be wall or cart mounted
- Genuine Parts - Manufactured by Graco
GR245848- Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
- Suits Graco Pumps in Hazardous locations
- Electrical Specs 120 VAC, 2300watts, 19.2 amps
- Manufactured with Stainless Steel
- Rated to 7,250 psi
- Can be wall or cart mounted
- Genuine Parts - Manufactured by Graco
-
GR25D515
- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 6' x 1" suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
GR25D515- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 6' x 1" suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
-
GR244841
- Suits Graco King, Xtreme and most Airless Spray Pumps
- Designed to be mounted on an Airless Sprayer between the incoming air and the air regulator
- Lubricates the incoming air to extend the life of the air motor
- Sold as a Kit which includes;
- The Lubricator
- Adaptor Pieces to match the air regulator
- Pins, O-Ring and Elbow fitting
- Genuine Parts - Manufactured by Graco
GR244841- Suits Graco King, Xtreme and most Airless Spray Pumps
- Designed to be mounted on an Airless Sprayer between the incoming air and the air regulator
- Lubricates the incoming air to extend the life of the air motor
- Sold as a Kit which includes;
- The Lubricator
- Adaptor Pieces to match the air regulator
- Pins, O-Ring and Elbow fitting
- Genuine Parts - Manufactured by Graco
-
- Male threads at both ends
- Carbon steel construction
- Optional stainless steel also available
- Various seal material options for fluid compatibility
- Mount on the high-pressure filter outlets for the control of individual spray lines
- Can be used as a priming-drain valve
- Premium PEEK Seals have more than double the life of Teflon
-
GR262478
- 3/8" NPTM holds 1/2" 12 element stick
- 7,250 psi rated
- Component of XM/XP Mix Manifold Kit
- Connects to static mixer adapter on the integration hose
- Mixer not included
- Genuine Graco part
GR262478- 3/8" NPTM holds 1/2" 12 element stick
- 7,250 psi rated
- Component of XM/XP Mix Manifold Kit
- Connects to static mixer adapter on the integration hose
- Mixer not included
- Genuine Graco part