My Account
Abrasives
Showing 1–15 of 32 results
-
Sponge-Jet blast media is unique in the field of abrasive blasting. (See How it Works under the Description tab.) Depending on project requirements, many versions are available as follows (all versions use original sponge carrier unless noted):- Silver Sponge series. Incorporates aluminum oxide abrasive.
- 16 to 320 mesh available, with the most common coating removal versions being Silver 30 or Silver 60.
- A DG (Double Grind) version is offered in the 30 and 60 mesh. This version is pre-processed to function like a working blend immediately, with up to 75% faster blast speed initially compared to original sponge abrasive.
- Red Sponge Media. Incorporates steel grit abrasive.
- Highly aggressive and typically used to remove pack rust and/or pitting.
- White Plastic Sponge Media. Incorporates Type II 30/40 mesh plastic urea.
- Lightly aggressive and used for coating removal without etching / profiling on steel or aluminum.
- White SPOCC Sponge Media. Incorporates Spherical Precipitate of Calcium Carbonate.
- Lightly aggressive and used for contaminant removal.
- White Glass Bead Sponge Media. Incorporates 60/80 mesh glass bead.
- Lightly aggressive, used for soft alloy substrates where a low-build coating system will be used.
- Green Sponge Media. Incorporates Wollastinite cleaning agent.
- Lightly aggressive, used for contaminant removal where moisture is not present.
- HyperX Media. Proprietary blend of aluminum oxide and other medias.
- Available in Medium or Coarse for 2 or 3 mil profile.
- Uses a higher ratio of abrasive-to-sponge, for faster production than even the Double Grind.
- Lower in cost, but not as effective in dust capture and with some ricochet, this media is best suited inside tanks or pipelines where 100% containment is assured.
- Hyper X media requires a specific 3-screen setup using the 70 series recycler (#3, #16, and #50)
- Super Media-1. Incorporates a blend of steel & ceramic abrasives.
- Highly aggressive, used for concrete blasting to expose aggregate, rubber lining removal on steel, lead paint removal in a demolition project, etc.
- When blasting on steel, this product creates such a high profile (8 mil plus) that some of the sponge will embed. If recoating, an additional cleaning process will be required using a steel brush, Bristle Blaster, etc.
- Silver Sponge series. Incorporates aluminum oxide abrasive.
-
The GMA GX2 ToughBlast Garnet Abrasive (P-GX2) is a high-performance abrasive designed for challenging industrial maintenance tasks. Offering a high surface profile from 3.0 - 3.75 mil, this abrasive ensures an exceptionally clean surface, perfect for high build coatings. With blasting rates up to 370 ft²/hr and a low to medium dust factor, it's ideal for rapidly removing heavy coatings and rust, especially in heavy-duty environments like offshore rigs and ship hulls.
- High surface profile from 3.0 - 3.75 mil for optimal coating preparation
- Blasting rates up to 370 ft²/hr for efficient operation
- Consumption rate of 1.5 - 3.0 lb/ft²
- Low to medium dust factor for cleaner work conditions
- Available in mesh sizes 16 and 36
- Packaged in 4400lb bulk bags, sold by the pallet
- MilSpec Approved for top-grade quality
-
The GMA GX1 SpeedBlast 30/60 Garnet Abrasive (SKU: P-GX1) is a MilSpec Approved, versatile maintenance grade abrasive. Perfect for removing light to medium coatings and rust, it efficiently produces a surface profile from 2.5 – 3.25 mil (65 – 85 µm). With blasting rates up to 350 ft²/hr and a low dust factor, it's ideal for general industrial maintenance, including construction, chemical plants, and more. Packaged in 4400lb bulk bags and available in mesh sizes 30/60 and 80, this garnet abrasive is sold by the pallet.
- MilSpec Approved, high-quality garnet abrasive
- Efficient surface profile creation from 2.5 – 3.25 mil
- Blasting rates up to 350 ft²/hr for rapid surface preparation
- Low consumption rate of 1.5 – 3.0 lb/ft²
- Low dust factor for cleaner operation
- Recyclability rating of 5/10
- Available in mesh sizes 30/60 and 80
- Packaged in 4400lb bulk bags, sold by the pallet
-
GMA GX3 ExtremeBlast Garnet Abrasive is ideal for surfaces requiring a high profile of 3.5 - 4.5 mil, ensures an exceptionally clean surface for superior bonding of specialist coatings. With blasting rates of up to 280 ft²/hr and a recyclability rating of 4/10, it's perfect for removing resistant coatings, heavy liners, and marine foulings, especially on high build coatings of 30+ mils.
- High surface profile of 3.5 - 4.5 mil for exceptional coating bonding
- Impressive blasting rates up to 280 ft²/hr
- Consumption rate of 2.5 - 3.5 lb/ft²
- Low to medium dust factor for cleaner operations
- Available in mesh sizes 16 and 36
- Packaged in 4400lb bulk bags, sold by the pallet
- MilSpec Approved for top-grade quality
-
- Multi-Purpose abrasive used for Sandblasting a variety of substrates, especially steel and concrete.
- Angular particle shape creates a profile on steel, with only minimal embedment into the surface.
- Mohs Hardness of 6-7
- Bulk Density: 75-100 lbs/ft2
- Less then 0.1% free silica
- Not Recommended for blasting on stainless or aluminum
- Comes in many different grades and packaging sizes
- Non-Recycling
- QPL Approved and MIL Spec approved abrasives available from select plants
- SSPC AB-1 Approved
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
- Black Beauty Iron Copper Slag is a high-density slag abrasive for sand blasting
- Less then 0.1% free silica
- Mohs Hardness of 6-7
- Bulk Density: 100-120 lbs/ft2
- Not Recommended for blasting on stainless or aluminum
- Comes in many different grades and packaging sizes
- Non-Recycling
- Passes 40CFR 261.24a (TCLP)
- Passes SSPC AB-1
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
- General Purpose abrasive used for Sandblasting
- Angular shape creates a profile on steel
- Mohs Hardness of 6-7
- Bulk Density: 75-100 lbs/ft2
- Less then 0.1% free silica
- Not Recommended for blasting on stainless or aluminum
- Comes in many different grades and packaging sizes
- Non-Recycling
- Meets SSPC-AB 1 Standard
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
Also known as White Fused Alumina, White Fused Aluminium Oxide Abrasive Media Is a Clean and Sharp abrasive used for high-performance and delicate blasting and cleaning projects, including cleaning of hi-tech metals. White Fused Alumina is an inert material with excellent abrasive qualities & available from most BlastOne branches in Australia. Brown aluminum oxide also available.
-
- Black Silicon Carbide media is a manufactured ceramic abrasive - extremely hard, aggressive, high performance abrasive used for cleaning and preparing very hard surfaces.
- Has a Mohs hardness of 9.0
- Cost effective when contained and recycled
- Can be mixed with paint coatings for creating high wear nonslip surfaces
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
The GMA CLASSIC CUT 80 MESH Garnet Abrasive Media (SKU: P-GANS) is an all-around abrasive ideal for sandblasting new steel and preparing surfaces for coating. This #80 grain size garnet is perfect for achieving a 25-50 micron profile, offering a typical consumption rate of 250 kg/hr and blasting rate of 20 m²/hr. Its pinkish to reddish-brown, sub-rounded grains deliver high performance with low dust, making it an economical choice for both single-use and recycling.
- #80 grain size for efficient sandblasting
- 25-50 micron surface profile ideal for new steel and mill scale removal
- Low dust, high performance garnet abrasive
- Economical with a typical consumption rate of 250 kg/hr
- Blowing rate of up to 20 m²/hr for millscale removal
- Suitable for a variety of industrial applications
- Packaged in convenient bulk sizes
-
The GMA Garnet ExcelCut WaterJet Abrasive, also known as P-GAWJ, is well-known for its top-notch precision and efficiency in waterjet cutting, making it a leading choice in the industry. Revolutionizing Waterjet Abrasive Cutting with ExcelCut ExcelCut is more than just an abrasive; it's a testament to the relentless pursuit of perfection in waterjet cutting technology. By choosing ExcelCut, you are not just buying an abrasive; you are investing in a legacy of excellence and innovation. Key Features and Benefits
- Unmatched Precision: The sharp, angular edges engineered into ExcelCut make it the ideal choice for tasks where accuracy is paramount. This precision enhances the quality of the final product, making it perfect for industries like aerospace, automotive, and manufacturing.
- Efficiency Redefined: In an industry where time is money, ExcelCut's faster cutting capability means increased productivity and reduced operational costs. It's not just about doing the job; it's about doing it more efficiently.
- Top-Quality Material: The hardest almandine garnet used in ExcelCut ensures that it can withstand the most challenging cutting tasks, translating into longer-lasting performance and fewer replacements.
- Stringent Quality Control: Each batch of ExcelCut goes through a rigorous quality control process. This ensures uniformity in particle size and the absence of unwanted dust, leading to a cleaner cut and a safer work environment.
- Military-Grade Approval: ExcelCut's adherence to MilSpec standards is a testament to its reliability and durability, making it the preferred choice in sectors that require the highest level of precision and quality.
- Convenient Packaging and Availability: Available for purchase by the pallet, ExcelCut ensures that you have a consistent supply for large-scale projects. While online ordering is not available, our dedicated customer service team can assist with orders and any inquiries.
-
GMA ExtremeBlast 36 Mesh Garnet Abrasive (SKU: P-GM36) is the ultimate solution for removing tough specialist coatings, heavy liners, and marine foulings. This coarse-grade abrasive is perfect for tackling high build coatings of 30+ mils, offering blasting rates of up to 260 ft²/hr. With its uniform surface profile of 3.5 – 4.5 mil and a low to medium dust factor, it achieves an exceptionally clean surface, ensuring strong bonding of specialist coatings. Ideal for critical applications like TSA preparation and extreme condition coatings, this abrasive is a top choice for the removal of high build, pliable, and flexible coatings, including coal tar and marine coatings.
- Coarsest grade garnet for resistant coating removal
- Effective on high build coatings over 30 mils
- Blasting rates up to 260 ft²/hr, creating a 3.5 – 4.5 mil surface profile
- Low to medium dust factor and excellent surface cleanliness for optimal coating adherence
- Efficient consumption rate as low as 2 lb/ft²
- Recyclability rating of 4/10
- Perfect for TSA preparation, extreme condition coatings, and critical component preparation
- Ideal for offshore platform decking, tanks, piping, pressure vessels, ship hulls, and ballast tanks
- Available in 16 and 36 mesh sizes
- Packaged in 55lb bags, and 2200lb & 4400lb bulk bags
- Sold by the pallet for bulk needs
-
The GMA PrecisionBlast 120 Mesh Garnet Abrasive (SKU: P-GA120), is a MilSpec Approved abrasive ideal for delicate surface preparation. Offering a fine surface profile of 1.0 – 2.0 mil (25 -50µm) or less, this abrasive boosts blasting rates up to 330 ft²/hr and a low consumption rate of 1.25 – 2.0 lb/ft². Its low dust factor and recyclability of 2/10 make it perfect for precision tasks on sensitive substrates like stainless steel, aluminum, titanium, and glass.
- Creates a fine surface profile of 1.0 – 2.0 mil
- High blasting rates up to 330 ft²/hr
- Low consumption rate of 1.25 – 2.0 lb/ft²
- Low dust factor for cleaner operations
- 120 mesh size for delicate cleaning tasks
- Ideal for etching glass and preparing sensitive metals
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
THe GMA SoftBlast Garnet Abrasive (SKU: P-GAFINE), is the softest abrasive in the GMA range, perfect for cleaning and polishing delicate surfaces. Achieving a surface profile of 0.5 – 1.0 mil (12 – 25µm) or less, it offers blasting rates up to 300 ft²/hr. With a low consumption rate of 0.75 – 2.0 lb/ft² and a recyclability rating of 1/10, this super fine garnet abrasive is ideal for tasks like historic monument cleaning, graffiti removal, and mold and mildew removal from log cabins.
- Super fine garnet abrasive for delicate surface work
- Surface profile of 0.5 – 1.0 mil for gentle cleaning and polishing
- Blasting rates up to 300 ft²/hr
- Low consumption rate for economical use
- Low dust factor for cleaner operations
- Mesh sizes of 200 and 350 for ultra-fine applications
- MilSpec approved, ensuring top quality
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)
Part Number Purchase Price GCHECKKITNS $575.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$575.00
-
