My Account
Abrasive Metering Valves
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 16–30 of 106 results
-
When Axxiom released the Thompson 2 valve, the benefits of Pressure-Hold technology were instantly upgraded by improved user experience over the Thompson I valve. Details as follows:- Improved servicability:
- Body and cylinder are now 2 parts, providing easier removal of sleeve and plunger.
- Additional Seal protection:
- Has 3 separate seals (versus the original 1), reducing dust migration and improving durability.
- Multiple Sleeve choices:
- In addition to the original Tungsten Carbide and Urethane full-flow options, Axxiom has released additional options that help prevent over-consumption in various applications.
- Virtual Position Indicator:
- Simplifies setting of the media flow rate.
- Cleanout:
- Full 1" port directly under the inlet allows cleanout without removing the valve.
- Size info:
- Standard 1-¼” (32 mm) inlet thread
- 4 choices of MNPT piping for pusher-line connection
- 1", 1-¼", 1-½", and 2"
- Options: Make servicing the valve even more convenient with one of the following:
- Union-End Ball Valve - The UEBV allows removal of valve without emptying the pot.
- Tri-Clover Quick Connect - allows removal of valve without tools.
- Combination UEBV and Tri-Clover - combines the benefits of both options at a reduced cost.
- Improved servicability:
-
- Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
- Used when an overhead hopper automatically feeds abrasive into a blast machine.
- Rugged stainless steel body, compact, isolated 2-bolt construction.
- Doubles blast machine refill cycle time.
- Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
- Set and forget – flow rates stay set where you put them.
- High wear, rugged plunger seal.
- Stainless steel body for long life.
- Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
- Fit a rebuild kit while the valve is still fitted to the blast machine.
- Sold individually.
- Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing
-
Schmidt changed the abrasive blasting industry when they introduced the MicroValve™. Now known as the MicroValve I (or the Original Microvalve), it is still available although most pressure-release Schmidt pots now use the newer MicroValve III®. It features:
- Simple threaded screw-type metering
- Hardened steel threaded base nipple
- (The brass threaded coupling shown is available separately.)
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
- Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
- Designed to handle the harshest blasting environments known
- Will handle up to a 3/4" blast nozzle
- Will work with any abrasive, including very fine/dusty abrasives
- Most rugged and reliable valve for any application
- Sold Individually
- Genuine Parts - Made in USA by Schmidt / Axxiom Manufacturing
-
The Thompson I Valve was invented by Bob Schmidt and was instrumental in causing the popularity of pressure hold technology.
- Pressure-hold systems retain the pressure in the blast pot until the deadman handle is depressed. This reduces abrasive and energy waste.
- The Thompson I offers fine control for abrasive metering
- It comes in 3 nipple size configurations:
- 1 ¼” (32 mm) x 1 ¼” (32 mm)
- 1 ½" (38 mm) x 1 ½" (38 mm)
- 2" (50 mm) x 2" (50 mm)
- Threaded-plunger metering design with air actuated operation
- Fits most sand blast hoppers, blast pots or abrasive blasting machines
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
The Flat Sand Valve is legacy metering technology, where the metering is performed by sliding a lever to open and close the abrasive port. It is simple in design and relatively inexpensive, but has a few limitations. Details as follows:
- Slide-plate metering design, controlled by lever
- 1 1/4" (32 mm) ports
- Features side cleanout-inspection port
- Available with or without outlet nipple and Y-piece (Optional rubber lined nipple is available to extend nipple life.)
- The major limitations are:
- Not recommended for use with metallic abrasives
- The slide plate/lever design does not provide effective fine metering control. Typically this results in over consumption of media. For low-volume blasting using inexpensive media, this may not be an issue.
-
GVDNV100
- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
GVDNV100- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
-
Have a good pot that you hate to throw away? The TeraValve™ Complete Blast Pot Retrofit Kit allows you to obtain state-of-the-art pressure-hold abrasive metering technology and save money in the process! Details as follows:
- Your existing pot must be structurally sound and must have at least 6 inches clearance below it.
- The retrofit kit includes a new TeraValve™ as well as all other valves, piping, deadman handle/controls, and hoses required for a complete upgrade.
- Note: Handway and pop-up components are available separately, if needed. In addition, you may want to consider the optional VBS II muffler and/or a union-end ball valve / quick connect (if you have the necessary clearance). See Related Products below.
- Retrofit kits are available in either pneumatic or electric and are offered in both 1-¼" and 1-½" valve sizes.
- Installation instructions are included in the box (and under the Documents tab here). If installation assistance is needed, call us for friendly tech support via phone or we can arrange to have our technicians perform the installation for you.
-
- Will transform your blast pot into a pressure hold system
- Retrofit Kit includes:
- Thompson® Valve Series II Metering Valve
- Full pusherline kit
- Automatic air valve and all interconnecting hoses
- Control line strainer and control valve
- Response deadman handle and Twinline
- Does not include muffler or pressure relief valve pictured
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
- To replace the valves on your pressure release blast pot
- Retrofit Kit includes:
- 1 1/4" Combo Valve
- 1 1/4" MicroValve 3
- Full pusherline kit
- All interconnecting hoses
- Control line strainer and control valve
- Response deadman handle and Deadman line
-
GV214950006
- OEM Replacement Plunger Seal for Large Bore Thompson I, Thompson II, MicroValve II, and MicroValve III valves
- Schmidt / Axxiom part # 2149-500-06
- Note - this product is replacing the purple GV215200006 seal
- Note - this product is also included in the relevant seal kits
GV214950006- OEM Replacement Plunger Seal for Large Bore Thompson I, Thompson II, MicroValve II, and MicroValve III valves
- Schmidt / Axxiom part # 2149-500-06
- Note - this product is replacing the purple GV215200006 seal
- Note - this product is also included in the relevant seal kits
Part Number Purchase Price GV214950006 $11.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$11.00
-
-
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:
- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
-
The Breather Vent is an essential component designed to prevent dust from entering the piston/cylinder top of the Thompson Valve II Metering Valve. Available in 1/8'' NPT or 1/4" NPT, this bronze silencer, brass strainer, and breather vent serves as an alternative replacement to Schmidt® 2152-000-17, or GV215200017. Sold individually, this Breather Vent ensures your system's longevity and optimal performance by maintaining a clean operating environment.
- Suits Thompson® Valve II Metering Valve
- 1/8'' NPT or 1/4" NPT - Bronze Silencer / Brass Strainer / Breather Vent
- An alternative replacement to Schmidt® 2152-000-17, or GV215200017
- Used to keep dust out of the piston/cylinder top of the Thompson valve
- Sold Individually
-
BlastOne stocks the Axxiom replacement parts you need to keep your valves operating. These are the bottom base pipe nipples for the Thompson II metering valve:
- 1" x 1", MPN 2152-000-19
- 1-¼" x 1-¼", MPN 2152-000-15
- 1-½" x 1-½", MPN2152-000-11
-
GV212800020
- 1-1/4" Heavy Duty Media Inlet Nipple with increased abrasion resistance
- Connects Metering Valve to Blast Pot
- Suits all Schmidt Abrasive Blast Pots, and any other vessel with a 1 1/4" NPT Metering Valve Ports
GV212800020- 1-1/4" Heavy Duty Media Inlet Nipple with increased abrasion resistance
- Connects Metering Valve to Blast Pot
- Suits all Schmidt Abrasive Blast Pots, and any other vessel with a 1 1/4" NPT Metering Valve Ports
Part Number Purchase Price GV212800020 $53.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$53.00
-
