Search: spray pumps

• 48:1 pump ratio – 100 psi inlet pressure will deliver 4,800 psi spray pressure
• Ideal for use as a solvent flush pump on a 2 component painting system
• Lower size is 75cc
• Comes with 50ft spray hose, 6ft whiphose, XTR504 gun and RAC tip
• Genuine product – manufactured by Graco

• Suits Graco King, Xtreme and most Airless Spray Pumps
• Designed to be mounted on an Airless Sprayer between the incoming air and the air regulator
• Lubricates the incoming air to extend the life of the air motor
• Sold as a Kit which includes;
  • The Lubricator
  • Adaptor Pieces to match the air regulator
  • Pins, O-Ring and Elbow fitting
• Genuine Parts – Manufactured by Graco

• Suits Warrior 4000 Conventional Sprayer
• Ball Check Repair Kit
• Sold as a Kit that includes all the Balls, Seats and Seals for the Warrior Pump
• Long Lasting Genuine Parts

• Electric
• No icing
• Reduced Noise
• Plug-in & Spray
• Hazardous Location approved
• Energy savings
• Pump type: Xtreme

• Suits Warrior Conventional Spray Pump
• Pick up tube and bent tube allows you to suction the coating out of a 5 Gallon Pail
• 3/8″ Internal Diameter
• 3′ hose including pick up tube
• Sold as a hose and Pick up tube Kit

• Designed for high production applications
• 5:1 Pump Ratio
• Often used as a solvent flush pump on larger Plural Component Spray Systems
• Pneumatic 2-ball piston pump
• Maximum Flow Rate 2.1 GPM
• Genuine Parts – Manufactured by Graco

• E-Xtreme Electric High Performance Airless Pump
• The Graco Z60 Sprayer is an electric alternative to air-operated single leg sprayers.
• It produces a smooth, consistent, evenly distributed spray pattern without the need to tow a large compressor.
• Will pressurize up to 6000psi working pressure
• Sprayer package in
  • Graco Z60 Electric Airless Pump
  • Includes Heavy Duty Cart
  • 3/8in x 15m Spray hose, 1/4in x 1.8m whip hose,
  • Graco XTR704 Spray gun with  XHD519 spray tip
• Genuine Products – Manufactured by Graco

Ultra Paint Spray Airless Hose (SKU: P-SPH50) delivers high pressure performance with a 3:1 safety factor, featuring swivel nut female connectors and safety spring guards.

• High-pressure airless hose, tailored for superior spray results.
• Features a 3:1 built-in safety factor, offering protection against pump runaway.
• Convenient swivel nut female connectors ensure easy fit-up, locking up rigidly when tightened.
• Enhanced safety with spring guards fitted to whip hose ends.
• The 3300 psi hose boasts a durable nylon braid, whereas other options come with a robust steel braid.
• Customizable offerings with multiple pressure ratings, sizes, and lengths available.

• Replacement Lower with built-in filter
• Retrofit an Xtreme pump lower to an existing old-style King or Bulldog air motor
• Improved performance especially with higher pressures 45:1, 56:1, 68:1, 80:1 ratios
• Reduced solvent usage quicker and easier to flush
• Extended life component
• Fast, simplified servicing with quick knockdown intake valve and cylinder

• Ultra flexible – easy to handle
• 200 psi air pressure rated, 85 psi fluid pressure rated
• Color coded Siamese hose
• Solvent compatible fluid hose liner
• Coupled with 3/8″ fluid / ¼” air fittings
• Standard 25 ft or 50 ft lengths
• Hose also available in made-to-order lengths and bulk – Call us!

• Suits Airless Paint Equipment up to 5000psi
• Fluid Ball Valve for High Pressure Paint
• ¼” x ¼” Male Threads on both ends
• 5000psi Rated
• Teflon seals are resistant to solvent
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Suits a Warrior 4000 Sprayer
• Stainless Steel Agitator and connection Kit
• Sold as a Kit which includes
  • Agitator
  • 1ft x 1/4″ poly tube and connections
  • Mounting Collar
  • Does not include the lid (suits Pail Mounted version)  If Lid is needed, see part GR197298.
• This agitator kit works with any of the Warrior 4000 sprayers
• #1 choice for when you are spraying zinc primers

• Air inlet: 3/8″ NPT(f)
• Air outlets: (2 regulated) 1/4″ NPT (f) – 1 Each
• 3/8″ NPT(f) – 1 Each
• Air outlets: (2 unregulated) 1/4″ NPT(f) – 2 Each
• Air Capacity: 60 CFM
• Maximum Temp: 150° F
• Max. Inlet Pressure: 150 psi
• Regulator range: 0-125 psi

• The original King High-Flow Sprayer from Graco is proven to outperform and outblast other sprayers in it’s class.
• This mid-size XL6500 Air Motor can handle large jobs that require a high-output sprayer, to support multiple spray guns
• Includes: Integrated filter, heavy duty cart, air kit, siphon kit and hose/gun kit
• Genuine product – manufactured by Graco
• Pump Size Calculator

• Easy to operate
• Utilizes Graco’s popular King and Xtreme airless spray technology
• 2:1 fixed ratio with 115/58 cc lowers
• Lowers have with built-in filters
• Cart mounted
• Comes with material hoses and XTR-7 gun
• Uses an NXT 6500 Air Motor
• Pump Size Calculator

• Complete System to spray Passive Fire Protection (PFP) coatings
• Uses a base Graco XM sprayer and includes
  • Two Check-Mate® 20-gal (76 l) heated hopper feed modules with agitators and level sensors
  • 50 ft (15 m) dual heated hose set
  • Remote mix manifold and 17 ft (5 m) of static mixing line
  • 30:1 solvent flush pump
  • XHF Gun with 429 tip.

• Used for the handling of high-viscosity coatings
• Prime alternative to troweling
• Ideal for touchup jobs and/or difficult-to-reach areas
• 5-gal dual post ram provides ample down force to load pump
• 290 cc Xtreme lower designed specifically for heavy viscosity material
• Tool-less wiper plate removal for easy maintenance
• Durable, rugged cart allows for single-person maneuverability

• Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
• Suits Graco Pumps in Hazardous locations
• Electrical Specs 240 VAC, 4000watts, 16.7 amps
• Manufactured with Stainless Steel
• Rated to 7,250 psi
• Can be wall or cart mounted
• Genuine Parts – Manufactured by Graco

• Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
• Suits Graco Pumps in Hazardous locations
• Electrical Specs 120 VAC, 2300watts, 19.2 amps
• Manufactured with Stainless Steel
• Rated to 7,250 psi
• Can be wall or cart mounted
• Genuine Parts – Manufactured by Graco

AVAILABLE FOR RENT OR PURCHASE

• Newest member of the Graco King family, designed for increased portability and affordability.
• Unparalleled finish quality with cutting-edge anti-icing technology
• Robust, low-profile design offers extreme mobility
• XL6500 Air Motor
• Purchase package includes Silver Plus™ Gun, 3/8″ x 50ft hose, 1/4″ x 6′ whip hose, XHD 417, 519 SwitchTip™ & Guard

• Suits all Paint Spray Pumps
• Specially formatted to dissolve material on displacement rods
• Throat Seal Liquid (TSL)
• Sold by the bottle 1 Quart
• Extends component life
• Check the pump throat and top up the liquid daily
• Prevents paint drying on the displacement rod and packings
• Genuine Parts – Manufactured by Graco

Easily double the capability of your Warrior (aka Triton 308) conventional spray pump by adding this valve kit. Includes all necessary fittings.

Kit does not include spray line or gun for the second operator. See here for available gun options.

See here for available spray/air line options.

• ConeSpray with Carriage – for 5″-10″ (125mm – 250mm) ID pipe
• “Hollow cone’ spray pattern
• Includes spray tip, shut-off valve, centering carriage
• 3,600psi pressure rating
• Connects to high-pressure airless sprayer pump – not included
• Not suited to spray UHS (Ultra High Solids) paints

• Heavy-duty coating unit
• Ideal for use on 3″-5″ (75mm-125mm) pipe internals
• Centering carriage, spray tip and shut-off valve included
• Pressured rated = 3,600psi
• Fastens directly to high-pressure (HP) airless spray pump

This Graco Stainless Steel Air-Driven Agitator features:

• Manually operated – Compatible with agitator speed controller
• Pneumatic Rotary Vane type
• Locking bolts to secure cover and reduce spills
• Ideal for wall mount pumps or spray packages
• Compatible with various lid types – a common configuration Graco 5-Gallon Pail Cover Agitator Kit is readily available.

• Nylon webbed paint strainer for straining coatings prior to spraying
• Reduces blockages in equipment – foreign particles are removed prior to entering pump, hoses, guns, etc
• Pack 12

AVAILABLE FOR RENTAL OR PURCHASE

• 185 cfm Compressor is suitable for a very small blaster or a spray pump
• PSI Range between 100-150psi
• Each compressor brand is different, so please request a quote.

AVAILABLE FOR RENTAL OR PURCHASE

• 900 cfm Compressor is suitable for 2 blasters plus a spray pump
• PSI Range between 125-150psi
• Each compressor brand is different, so please request a quote.