Search: chloride

• Refill kit for CSN Test Kit
• Used to measure surface contamination from Chlorides, Sulphates and Nitrates
• Comes in a Pack of 5 Tests
• Genuine Parts – Manufactured by ChlorRid

• For analysis of chloride ions, ferrous ions and pH level
• Chloride Ion Detection Threshold: approx 40 ppm
• Ferrous Ion Detection Threshold: approx 3 ppm
• pH measurement range: 4 to 9 verified by color scale
• Complete kit supplied with graduated cylinder, beakers, tweezers, water demineralizer cartridge, cotton balls, chloride ion titration strips, ferrous ion titration strips, ruler, instructions and hard cover carry-case
• Surface Contamination Analysis Test (SCAT) Kit
• ‘Swab method’ used in accordance with AS1627-1, AS3894-6 Standard

• Complete Chloride, Sulfate, Nitrate Test Kit
• Uses ‘standard’ Chlor*Test method for chloride ions
• Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
• Used in accordance with ISO8502, AS1627-4 Standards
• Measurement range:
  • Chlorides: 5 ppm to 200 ppm
  • Sulfates: 0 ppm to 100 ppm
  • Nitrates: 0 ppm to 150 ppm
• Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
• Supplied in a portable, hard cover carry-case
• Genuine Parts – Manufactured by ChlorRid

• Recommended for large inspection projects, complex specifications and regular use
• Covers coating thickness, surface profile, climatic conditions and adhesion testing and surface chloride testing
• Items in this kit include:
  • PaintGage coating thickness gage – memory model, separate or integral probe with software
  • Certified coated thickness standard
  • DewCheck electronic climatic gage
  • 10 x aluminum wet film combs to 1 to 80 mil (25 to 2032 micron) range
  • Magnetic surface thermometer -22°F to +122°F (-30°C to +50°C) range
  • Testex surface profile test kit – includes dial thickness gage, 100 Testex tape tests and burnishing tools
  • Surface comparators with illuminated magnifier
  • Cross hatch adhesion test kit – includes cross hatch cutter and ISO roll of tape
  • S20 hazardous area inspection light
  • Five x Chlor*Test surface chloride tests
  • Retractable inspection mirror

From the makers of the Nova Respirators!

• GVS Masks are made from TPE and are hypoallergenic and non-irritating.
• Extremely lightweight and comfortable.
• Each mask includes the initial set of filters installed and is ready-to-use.
• Price shown per-each.  Packed 4 per case, with case discount.
• Multiple filter versions available as follows:
  • OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
  • OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
    • Solvents
    • Chlorine and Chlorine Dioxide
    • Hydrogen Chloride and Hydrogen Fluoride
    • Sulphur Dioxide
    • Organic Vapors
  • Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gasses. All acid gases above, plus:
    • Ammonia
    • Formaldehyde
    • Hydrogen Sulfide
    • Methylamine
  • Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
  • Keep your respirator fresh with the standard-profile line of GVS replacement filters.
• NIOSH Approved with ANSI Z87+ eye protection
• Goggles are scratch and fog resistant.  Tear-off lenses available separately to keep them clean while spraying.

NOTE – This is the standard-profile series, which has the largest variety of protective filters.  Low-profile Integra Masks (which offer an enhanced field of vision) are also available.

Your regular eyeglasses will not fit under these goggles.  However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.

As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adaptor is available to facilitate this testing.

From the makers of the Nova Respirators! 

• GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
• Extremely lightweight and comfortable.
• Each mask includes the initial set of filters installed and is ready-to-use.
• Price shown per-each.  Packed 8 per case, with case discount.
• Multiple filter versions available as follows:
  • OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
  • OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
    • Solvents
    • Chlorine and Chlorine Dioxide
    • Hydrogen Chloride and Hydrogen Fluoride
    • Sulphur Dioxide
    • Organic Vapors
  • Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases. All acid gases above, plus:
    • Ammonia
    • Formaldehyde
    • Hydrogen Sulfide
    • Methylamine
  • Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
  • Reuse your respirator over and over again with the standard-profile line of GVS replacement filters.
• NIOSH Approved TC-84A-8062.

NOTE – This is the standard profile series. Low-profile Elipse masks are also available.

As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.

The PX5 PAPR is approved for use with most of the RPB / GVS range of respirators.  Refresh or expand your PX5 using the filters and cartridges available below:

• Pre-Filters.  Extend the life of the main filters using these.  10 per pack.
• Spark Arrestor.  Essential when using the PX5 in certain applications.
• HEPA Cartridge Filter.  The workhorse High Efficiency particulate filter, provides maximum filtration (removes 99.97% of particulates down to 0.12 microns.)
• Organic Vapor and Acid Gas Cartridge Filter.  (HE/OV/AG.)  Label Color Code Yellow/Magenta.  The painters favorite.  Approved for the following gases:
  • Solvents
  • Chlorine and Chlorine Dioxide
  • Hydrogen Chloride and Hydrogen Fluoride
  • Sulphur Dioxide
  • Organic Vapors
• Multi-Gas / HE Cartridge Filter.  Label Color Code Olive/Magenta.  Approved for all the same gases as the OV/AG filter plus the following:
  • Ammonia
  • Formaldehyde
  • Hydrogen Sulfide
  • Methylamine